Use before reading or changing `.zen` files for Zener semantics, package APIs, dependency workflow, stable topology, and validation.

End-to-end onboarding for a freshly-plugged-in M5Stack ESP32 device (Cardputer, Cardputer-Adv, Core, CoreS3, Stick) — detect on USB, flash UIFlow 2.0 firmware, and install the Claude Buddy MicroPython app bundle. Use whenever the user plugs in or wants to flash/provision/reset an M5Stack or ESP32 board, or says "m5-onboard go".

Iterate on the Cardputer-Adv MicroPython app bundle (Claude Buddy, Snake, Hello) after the device is already provisioned via m5-onboard. Use when the user wants to add a new app, push a single changed .py without re-flashing, watch device serial logs, or run a one-shot REPL command. Trigger on "add an app", "push to the cardputer", "tail the device", "run on the device", or follow-up work after /maker-setup.

Discover and run Holoscan Sensor Bridge example applications on a connected devkit. Filters available apps by the user's platform, HSB software version, board type, and sensors. Supports timed execution, failure analysis, code-edit suggestions, and iterative re-runs.

Flash the FPGA on an HSB board connected to an NVIDIA devkit. Supports HSB Lattice boards (FPGA versions 2407, 2412, 2507, 2510) and Leopard Imaging VB1940 "all-in-one" cameras (FPGA versions 2507, 2510). Uses release-specific YAML manifests and board-type-specific program commands. Lattice and VB1940 commands must never be mixed.

Execute QA test plans on Holoscan Sensor Bridge hardware. Reads a user-provided test document, filters tests by the user's setup, determines which tests can run automatically, executes them with pass/fail evaluation, and produces a structured test results report.

Clone the latest NVIDIA Holoscan Sensor Bridge repo, ask which supported devkit is being used, configure the host per platform, build the correct demo container, run it, and verify HSB connectivity by pinging 192.168.0.2. Use for Holoscan Sensor Bridge setup, build, container launch, and first-connectivity bring-up.

Use `pcb scan` to read datasheets or technical PDFs from files, URLs, or KiCad `Datasheet` properties.